IEC 61587-1:2011 電子設備的機械結構.IEC 60917標準和IEC 60297標準測試.第1部分:環境要求,貯藏柜,行李架,插箱和底盤在室內條件下的試驗裝備和安全性

Scope and object This part of IEC 61587 specifies environmental requirements@ test set-up@ as well as safety aspects for empty enclosures@ i.e. cabinets@ racks@ subracks and chassis under indoor conditions. The purpose of this standard is to establish defined levels of physical performance in order to meet certain requirements of storage@ transport and final location conditions. It applies in whole or part only to the mechanical structures of cabinets@ racks@ subracks and chassis@ but it does not apply to electronic equipment.

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Environmental requirements, test-set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions

UL 50E CRD-2011 電氣設備用外殼和環境考量的UL安全標準. 節/段落參考: 修訂的1.1, 5.1.7, 7.1.1, 7.2.3.1, 7.2.4.1, 7.3.3.1, 7.3.3.2, 7.3.3.3, 7.3.4.1, 7.3.5.1, 7.5.2, 7.6.1, 8.3.4, 8.5.2, 8.5.3, 8.9, 8.13.1.1, 8.13.3.1, 9.2.3, 9.3.2, 9.3.3, 9.3.7, 9.5.1, 9.5.2, 9.5.3, 9.7.1, 9.7.2, 表1, 表2, 表C.1主題: 添加

UL Standard for Safety Enclosures for Electrical Equipment, Environmental Considerations - Section / Paragraph Reference: Revised 1.1, 5.1.7, 7.1.1, 7.2.3.1, 7.2.4.1, 7.3.3.1, 7.3.3.2, 7.3.3.3, 7.3.4.1, 7.3.5.1, 7.5.2, 7.6.1, 8.3.4, 8.5.2, 8.5.3, 8.9, 8.1

DIN EN 60670-1 Berichtigung 3:2010 家用和類似固定電氣裝置的電氣附件盒和外殼. 第1部分: 一般要求（IEC 60670-1: 2002 + 勘誤表（2003）修改件）; 德文版本EN 60670-1: 2005, DIN EN 60670-1 （VDE 0606-1）: 2005-10勘誤; 德文版本 歐洲電工標準委員會. EN 60670-1: 2005勘誤（2010）

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements (IEC 60670-1:2002 + corrigendum 2003, modified); German version EN 60670-1:2005, Corrigendum to DIN EN 60670-1 (VDE 060

DIN EN 60670-23:2009 家用和類似用途固定電氣設施附件外殼.第23部分:地板插座與接線外殼的詳細要求(IEC 60670-23-2006,修訂本).德文版本EN 60670-23-2008

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures (IEC 60670-23:2006, modified); German version EN 60670-23:2008

IEC TS 62610-1:2009 電子設備的機械結構.符合IEC 60297和IEC 60917系列的機柜熱管理.第1部分:設計指南:熱電冷卻系統的接口尺寸和規定（珀耳帖效應）

Mechanical structures for electronic equipment - Thermal management for cabinets in accordance wit IEC 60297 and IEC 60917 series - Part 1: Design guide: Interface dimension and provision for thermoel

DIN EN 60297-3-105:2009 電氣設備的機械結構.482.6 mm(19 in)系列的機械結構尺寸規格.第3-105部分:1U高底盤的尺寸規格和設計方面(IEC 60297-3-105-2008).德文版本EN 60297-3-105-2009

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis (IEC 60297-3-105:2008); German version EN 60297-3-105:2009

DIN EN 60297-3-100:2009-09 電氣設備的機械結構.482.6 mm(19 in)系列的機械結構尺寸規格.第3-100部分:面板,子架,底盤,架子和柜子的基準尺寸規格(IEC 60297-3-100-2008).德文版本EN 60297-3-100-2009

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets (IEC 60297-3-100:2008); German version EN 60297-3-100

BS EN 60670-23:2008 家用和類似用途固定電氣設施附件外殼.第23部分:地板插座和外殼的詳細要求

This clause of Part 1 is applicable except as follows: Addition after the fourth paragraph: This standard applies to boxes and floor enclosures. The flush floor boxes and flush floor enclosures are intended to be intended to protect accessories against load up to and including 1 000 N.

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23:Particular requirements for floor boxes and enclosures

DIN EN 60670-1 Berichtigung 2:2009 家用和類似用途固定電氣裝置的電氣附件用機箱與外殼.第1部分:一般要求.技術勘誤DIN EN 60670-1(VDE 0606-1)-2005

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements (IEC 60670-1:2002 + corrigendum 2003, modified); German version EN 60670-1:2005, Corrigendum to DIN EN 60670-1 (VDE 060

JEM 1267-2008 開關裝置和控制裝置附件裝備的保護結構的分類

Classification of protective construction provided by enclosures for switchgear and controlgear assemblies

CSA C22.2 No.94.2-07 UPD 1-2008 電氣設備的外殼，環境研究.第1版

Enclosures for Electrical Equipment, Environmental Considerations First Edition

CSA C22.2 No.94.1-07 UPD 1-2008 電氣設備外殼：非環境因素第二版

Enclosures for Electrical Equipment, Non-Environmental Considerations

Enclosures for electrical equipment: non-ambient factors second edition

IEC 60529:1989/COR2:2007 外殼防護等級(IP代碼).技術勘誤2

This standard is Degrees of protection provided by enclosures (IP code); Corrigendum 2.

Degrees of protection provided by enclosures (IP code); Corrigendum 2

UL 50E-2007 環境考慮的電氣設備用外殼

This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001-SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2, 5, 12, 12K, and 13; and b) Enclosures for indoor or outdoor locations, Types 3, 3R, 3S, 4, 4X, 6, and 6P. This standard covers additional environmental construction and performance requirements for enclosures. The general requirements for enclosures are contained in standard CSA C22.2 No. 94.1, UL 50, and NMX-J-235/1-ANCE (See Annex b, Ref. No. 10) or the end-use product standards that are to be used in conjunction with this standard. This standard does not cover the requirements for protection of devices against conditions such as condensation, icing, corrosion, or contamination that may occur within the enclosure or that may enter via conduit or unsealed openings. Where an individual product standard contains requirements that are at variance with those of this standard, the requirements of the individual product standard take precedence.

Enclosures for electrical equipment, environmental considerations

UL 50-2007 非環境考慮的電氣設備用外殼

This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001-SEDE, as follows: Enclosures for indoor locations, Types 1, 2, 5, 12, 12K, and 13; and Enclosures for indoor or outdoor locations, Types 3, 3R, 3S, 4, 4X, 6, and 6P. This standard covers the non-environmental construction and performance requirements for enclosures to provide a degree of protection to personnel against incidental contact with the enclosed equipment. The additional environmental construction and performance requirements for enclosures are located in C22.2 No. 94.2, UL 50E, and NMX-J-235/2-ANCE (See Annex b, Ref. No. 14), which are intended to be used in conjunction with this standard. Where an individual product standard contains requirements that are at variance with those of this standard, the requirements of the individual product standard take precedence. In the United States and Mexico, cabinets and cutout boxes and junction and pull boxes are covered by Clauses 9 and 10 of this Standard. In Canada, junction boxes, cutout boxes, and pull boxes are covered by CSA C22.2 No. 40 and are not covered by this standard. See Annex b, Ref. No. 11. 1.5 Outlet boxes having a volume of not more than 1640 cm3 (100 in3) are covered by CSA C22.2 No. 18, NMX-J-023/1-ANCE, and the UL 514 series (see Annex b, Ref. No. 6 and 12) and are not covered by this standard. 1.6 In Canada and the United States , swimming pool type junction boxes are covered by CSA C22.2 No. 89 and UL 1241 (see Annex b, Ref. No. 10) and are not covered by this standard.

Enclosures for electrical equipment, non-environmental considerations

ANSI/UL 50E-2007 電氣設備用外殼環境考慮的安全標準

This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the applicable electrical codes for: Enclosures for indoor locations, Types 1, 2, 5, 12, 12K, and 13; and Enclosures for indoor or outdoor locations, Types 3, 3R, 3S, 4, 4X, 6, and 6P. This standard covers additional environmental construction and performance requirements for enclosures. General requirements for enclosures are contained in the "Standard for Enclosures for Electrical Equipment, Non-environmental Considerations", or the end-use product standards.

Standard for Safety for Enclosures for Electrical Equipment, Environmental Considerations

DIN EN 60670-22:2007 家用和類似固定電氣裝置的電氣附件用機箱和外殼.第22部分:連接機箱和外殼的特殊要求

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures (IEC 60670-22:2003, modified); German version EN 60670-22:2006

BS PD CLC/TR 50473:2007 家用和類似裝置用軌道安裝式內裝儀器和外殼之間配合尺寸的推薦規范

The purpose of this report is to give recommendations of the co-ordination of dimensions between enclosures and built-in devices for rail fixing for household or similar installations by listing the principal overall and related mounting dimensions, the rated current of a single device not exceeding 125 A. Examples of these devices are: MCBs, RCDs switches, fuse-systems, indicating lamps, relays, socketoutlets, timing switches, etc. Compliance with this document does not preclude the need for compliance with other relevant specifications. This document needs not apply to type tested and partially type tested assemblies which are covered by other specifications. The means of fixing envisaged in this document are mounting rails. Other possible means of fixing may be used but are not covered by these recommendations. NOTE The only criterion chosen in this document for co-ordination of dimensions has been the geometry of the devices. When selecting the enclosure, other criteria should be taken into account, e.g. the rated current of the devices.

Recommendations for dimensional co-ordination between enclosures and built-in devices for rail fixing for household and similar installations

IEC 61587-1:2007 電子設備用機械構件.IEC 60917和IEC 60297的試驗.第1部分:機箱、機柜、分機柜和機架的氣候試驗、機械試驗和安全性能

GB/T 18663的本部分規定了戶內和戶外使用的符合IEC 60917(公制系列)和IEC 60297(英制系 列)標準的機柜、機架、插箱和機箱的機械試驗、氣候試驗和安全要求。它僅全部或部分地適用于機柜、 機架、插箱和機箱的機械結構，而不適用于電子設備或系統。專用于戶外機殼的試驗在GB／T 19183．5 中規定，本部分中的一些適合的部分用于GB／T 19183．5。 本部分的目的是在考慮不同應用中不同性能等級的需要的同時，保證機柜、機架、插箱和機箱的物 理完整性。它試圖讓用戶在選擇性能水平以盡可能精確滿足其特定的應用要求時比較有把握。

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis

SANS 60670-23:2006 家用和類似用途固定電氣設施附件外殼．第23部分：地板插座與接線外殼的特殊要求

Applies to boxes and enclosures for electrical accessories with a rated voltage not exceeding 1 000 V a.c. and 1 500 V d.c. intended to be installed in any kind of floor, and to protect accessories against load up to and including 1 000 N.

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 23: Particular requirements for floor boxes and enclosures