ISO 10426-2:2003 石油和天然氣工業.油井固井用水泥和材料.第2部分:油井用水泥的試驗

This part of ISO 10426 specifies requirements and gives recommendations for the testing of cement slurries and related materials under simulated well conditions.

Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements

DIN EN ISO 13691:2003 石油和天然氣工業.高速專用齒輪機構

This International Standard contains requirements for high-speed special-purpose gear units in the petroleum and natural gas industries.

Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002

ISO 20764:2003 石油和相關產品.水量測定用高沸點流體試驗區的準備.氮凈化法

This International Standard specifies two procedures for the preparation of test portions from petroleum and related products boiling above 200 ℃, which can then be used for the determination of total water content within the range of 3 mg/kg to 1 000 mg/kg. The method is applicable to unused and used lubricating oils, non-aqueous hydraulic fluids and high-boiling solvents. The test portions generated by these procedures are suitable for standard Karl Fischer water-content determinations, such as those described in ISO 6296 (see [1] in the Bibliography) and ISO 12937 (see [2] in the Bibliography).

Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method

BS EN ISO 10437:2003 石油、石油化學和天然氣工業.專用汽輪機設備

ISO 10437:2003 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of special-purpose steam turbines. It also covers the related lube-oil systems, instrumentation, control systems and auxiliary equipment. It is not applicable to general-purpose steam turbines, which are covered in ISO 10436.

Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications

ISO 13503-1:2003 石油和天然氣工業.完井液和材料.第1部分:完井液粘著特性的測量

This part of ISO 13503 provides consistent methodology for determining the viscosity of completion fluids used in the petroleum and natural gas industries. For certain cases, methods are also provided to determine the rheological properties of a fluid.

Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids

SY/T 10048-2003 腐蝕管道評估的推薦作法

Recommended practice for evaluation of corroded pipelines

ANSI/NACE MR0175-2003 油田設備用的硫化耐應力斷裂的金屬材料

This standard presents metallic material requirements to provide resistance to sulfide stress cracking (SSC) and/or stress corrosion cracking (SCC) for petroleum production, drilling, gathering and flow line equipment, and field processing facilities to be used in hydrogen sulfide (H2S)-bearing hydrocarbon service. This standard does not include and is not intended to include design specifications. Other forms of corrosion and other modes of failure, although outside the scope of this standard, should also be considered in design and operation of equipment. Severely corrosive conditions may lead to failures by mechanisms other than SSC and/or SCC and should be mitigated by corrosion inhibition or materials selection, which are outside the scope of this standard. For example, some lower-strength steels used for pipelines and vessels may be subjected to failure by hydrogen-induced cracking (blistering and stepwise cracking) as a result of hydrogen damage associated with general corrosion in the presence of H2S.

Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment

ISO 10442:2002 石油、化學和氣體設備工業.包裝的整體式齒輪分離空氣壓縮機

This International Standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of constant-speed, packaged, integrally geared centrifugal air compressors, including their accessories, for use in the petroleum, chemical and gas service industries. It is also applicable to gas services other than air that are non-hazardous and non-toxic. It is not applicable to machines that develop a pressure rise of less than 35 kPa above atmospheric pressure, which are classed as fans or blowers. NOTE In this International Standard, where practical, US customary units have been included in brackets for information.

Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors

BS EN ISO 13631:2002 石油和天然氣工業.整裝往復式氣體壓縮機

ISO 13631:2002 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of packaged skid-mounted, reciprocating, separable or integral compressors with lubricated cylinders and their prime movers, for use in the petroleum and natural gas industries for the compression of hydrocarbon gas. It is also applicable to all necessary auxiliary equipment, such as water and gas coolers, silencers, emission control equipment, filters, separators, control panel, piping, etc., required to install an operable unit in compliance with the purchase specifications and with the intent of minimizing field construction and field-purchased equipment. ISO 13631:2002 is not applicable to the following: reciprocating compressors for petroleum and natural gas industries covered by ISO 13707; column-mounted compressors; non-lubricated compressors; compressors having trunk-type (automotive-type) pistons that also serve as crossheads; utility or instrument air compressors with a discharge gauge pressure of 0,9 MPa (9 bar) or less; compressors driven by diesel engine, gas turbine and steam turbine prime movers.

Petroleum and natural gas industries. Packaged reciprocating gas compressors

ISO 10426-1:2000/Amd 1:2002 石油和天然氣工業.油井固井用水泥和材料.第1部分:規范.修改1

Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification; Amendment 1

ISO 16812:2002 石油和天然氣工業.殼管式熱交換器

This International Standard specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum and natural gas industries. This International Standard is applicable to the following types of shell-and-tube heat exchangers: heaters, condensers, coolers and reboilers. This International Standard is not applicable to vacuum-operated steam surface condensers and feed-water heaters.

Petroleum and natural gas industries - Shell-and-tube heat exchangers

SY/T 10043-2002 泄壓和減壓系統指南

本標準適用于壓力泄放和蒸汽減壓系統。提供的資料是用來幫助選擇最適用于各種裝置在出現危險情況時的泄壓和減壓系統。本標準的目的是補充API RP 520 I 煉油廠壓力泄放裝置的尺寸確定、選擇和安裝第一部分尺寸確定和選擇(第五版)所規定的作法，以便確立一個設計依據。 本標準為分析超壓的主要原因、確定單項釋放量以及選擇和設計諸如容器、火炬和放空塔在內的處理系統提供了指南。 在本標準5.4.1中提出了與泄壓系統有關的管線資料。但是，實際管線應按照ASME(美國機械工程師學會)B31.3或其他適用的規范進行設計。 健康危險與壓力泄放設備的操作可能有關。特殊風險的討論超出了本標準的范圍。

Pressure Relief and Pressure Relief Systems Guide

BS EN 12979:2002 汽車液化石油氣設備.安裝要求

Automotive LPG systems - Installation requirements

BS EN ISO 13691:2002 石油和天然氣工業.專用高速齒輪組件

Petroleum and natural gas industries. High-speed special-purpose gear units

ISO 15156-1:2001 石油和天然氣工業 石油制品和天然氣生產中含硫化氫（H2S）環境下使用的材料 第1部分：耐破裂材料的一般選擇指南

This part of ISO 15156 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural gas sweetening plants in H2S-containing environments, where the failure of such equipment could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the material requirements given in the appropriate design codes, standards or regulations. This part of ISO 15156 addresses all mechanisms of cracking that can be caused by H2S, including sulfide stress cracking, stress corrosion cracking, hydrogen-induced cracking and stepwise cracking, stress-oriented hydrogen-induced cracking, soft zone cracking and galvanically induced hydrogen stress cracking. Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions. This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. This part of ISO 15156 is not necessarily applicable to equipment used in refining or downstream processes and equipment. CAUTION — Metallic materials selected or qualified using ISO 15156 are resistant to cracking in defined H2S-containing environments in oil and gas production, but are not necessarily immune under all service conditions.

Petroleum and natural gas industries - Materials for use in H₂S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials

BS ISO 4269:2001 石油和液化石油產品.通過液體測量進行油箱校準.使用容積測量儀的遞增法

This International Standard specifies a method for the calibration of tanks by addition of batches of liquid. The liquid is used as a volume-transfer medium, measured accurately by means of a meter. This International Standard is not applicable to the calibration of reference measuring instruments, proving tanks, or meter provers. NOTE Applicable standards are given in the bibliography.

Petroleum and liquid petroleum products - Tank calibration by liquid measurement - Incremental method using volumetric meters

BS EN ISO 17776:2002 石油和天然氣工業.海上開采裝置.危險識別和風險評定用工具和技術導則

Petroleum and natural gas industries. Offshore production installations. Guidance on tools and techniques for hazard identification and risk assessment

ASTM G170-01a 在實驗室評價和合格鑒定油田和煉廠的腐蝕抑制劑的標準指南

1.1 This guide covers some generally accepted laboratory methodologies that are used for evaluating corrosion inhibitors for oilfield and refinery applications in well defined flow conditions.1.2 This guide does not cover detailed calculations and methods, but rather covers a range of approaches which have found application in inhibitor evaluation.1.3 Only those methodologies that have found wide acceptance in inhibitor evaluation are considered in this guide.1.4 This guide is intended to assist in the selection of methodologies that can be used for evaluating corrosion inhibitors.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

ASTM G170-01 在實驗室評價和合格鑒定油田和煉廠的腐蝕抑制劑的標準指南

1.1 This guide covers some generally accepted laboratory methodologies that are used for evaluating corrosion inhibitors for oilfield and refinery applications in well defined flow conditions.1.2 This guide does not cover detailed calculations and methods, but rather covers a range of approaches which have found application in inhibitor evaluation.1.3 Only those methodologies that have found wide acceptance in inhibitor evaluation are considered in this guide.1.4 This guide is intended to assist in the selection of methodologies that can be used for evaluating corrosion inhibitors.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

SY/T 5276-2000 化學防砂人工巖心抗折強度、抗壓強度及氣體滲透率的測定

Determination of flexural strength, compressive strength and gas permeability of chemical sand control artificial core