GB/T 18188.1-2021 溢油分散劑 第1部分：技術條件

本文件規定了溢油分散劑的分類、技術要求、試驗方法、檢驗規則、標志、標簽和使用說明書、包裝和貯存等要求。 本文件適用于溢油分散劑產品生產、檢驗、合格判定等。

Oil spill dispersant—Part 1:Technical requirements

GB 19592-2019 車用汽油清凈劑

Detergent additive for motor gasoline

GB/T 32859-2016 柴油清凈劑

本標準規定了柴油清凈劑的術語和定義、要求和試驗方法、檢驗規則、標志、包裝、運輸和儲存、安全。 本標準適用于車用柴油、普通柴油和生物柴油調合燃料(B5)等柴油發動機燃料中使用的清凈劑。

Detergent additive for diesel fuel

GB 18188.1-2000 溢油分散劑 技術條件

本標準規定了溢油分散劑的分類、性能指標、試驗方法、檢驗規則、標志、標簽、使用說明書、包裝、貯存和過期產品處置等要求。 本標準適用于在中華人民共和國管轄水域內使用的溢油分散劑。

Oil spill dispersant-Technical regulations

GB/T 18188.2-2000 溢油分散劑 使用準則

Oil spill dispersant--Application criteria

GB/T 18188.1-2000 溢油分散劑 技術條件

Oil spill dispersant--Technical regulations

GB/T 17753-1999 汽車發動機潤滑油節能添加劑試驗評定方法

本標準規定了對汽車發動機潤滑油節能添加劑的試驗評定方法。 本標準適用于汽車發動機潤滑油節能添加劑。

Test and evaluation methods on fuel-saving additives of auto-engine oil

GB/T 17752-1999 汽車燃油節能添加劑試驗評定方法

本標準規定了汽車燃油節能添加劑的節能試驗評定方法。 本標準適用于汽車燃油節能添加劑。

Test and evaluation methods on fuel-saving additives of auto-fuel

EN ISO 17292:2015 石油金屬球閥,石油化工及相關產業（ISO 17292:2015）

Diese Internationale Norm legt die Anforderungen an eine Reihe von Kugelh?hnen aus Metall fest, die für den Einsatz in Anlagen der Erd?l-, petrochemischen, Erdgas- und verwandten Industrien geeignet sind. Sie gilt für Armaturen mit den Nennweiten DN 8; 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 150; 200; 250; 300; 350; 400; 450; 500; 600 entsprechend den Rohr-Nennweiten NPS 1/4; 38; 1/2; -; 1; 1 1/4; 1 1/2; 2; 2 1/2; 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 24 und für folgende Druckbezeichnungen Class 150; 300; 600; 800 (Class 800 gilt nur für Armaturen mit Gewinde- und Schwei?muffenenden); PN 16; 25; 40; 63; 100. Die Norm enth?lt Festlegungen zur Prüfung und Inspektion sowie zu folgenden Armaturen-Merkmalen: Flansch- und Anschwei?enden: in den Nennweiten 15 DN 600 (1/2 NPS 24); Schwei?muffen- und Gewindeenden: in den Nennweiten 8 DN 50 (1/4 NPS 2); Geh?usesitz?ffnungen mit vollem, reduziertem oder zweifach reduziertem Durchgang; Werkstoffe.

Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)

SY/T 7025-2014 酸性油氣田用緩蝕劑性能實驗室評價方法

本標準規定了酸性油氣田用緩蝕劑性能的實驗室評價方法。 本標準適用于含硫化氫、二氧化碳油氣田用緩蝕劑性能的實驗室評價，其他油氣田用緩蝕劑性能的實驗室評價也可參照?qǐng)?zhí)行。

Laboratory evaluation methods for performance of corrosion inhibitors used in sour oil and gas fields

NB/SH/T 0855-2013 合成烷基苯磺酸鈣清凈劑

本標準規定了用不同烯烴與苯烷基化得到的合成烷基苯為原料,經磺化、金屬化制得的合成烷基苯磺酸鈣清凈劑的分類、要求和試驗方法、檢驗規則及標志、包裝、運輸和貯存。本標準適用于調制不同牌號內燃機油的合成烷基苯磺酸鈣清凈劑。

Synthetic alkylbenzene calcium sulfonate detergents

DB50/ 418-2012 重慶市大氣污染物綜合排放標準

本標準適用于重慶市范圍內現有固定污染源的排放管理，以及新、改、擴建項目的環境影響評價、建設項目環境保護設施設計、竣工驗收及其投產后的排放管理。

Comprehensive Emission Standards of Air Pollutants in Chongqing

ASTM F2921-11 添加劑制造中所用的坐標系統和測試方法的標準術語

Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CNC are not sufficient to be applicable across the full spectrum of additive manufacturing equipment. This terminology expands upon the principles of ISO 841 and applies them specifically to additive manufacturing. Although this terminology is intended to complement ISO 841, if there should arise any conflict, this terminology shall have priority for additive manufacturing applications. For any issues not covered in this terminology, the principles in ISO 841 may be applied. Furthermore, this terminology does not prescribe the use of any specific existing testing methodologies or standards that practitioners of AM may wish to employ for testing purposes; however, it is expected that practitioners will employ appropriate existing methodologies and standards to test parts made by AM.1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Terms included cover definitions for machines/systems and their coordinate systems plus the location and orientation of parts. It is intended, where possible, to be compliant with ISO 841 and to clarify the specific adaptation of those principles to additive manufacturing. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Terminology for Additive ManufacturingCoordinate Systems and Test Methodologies

BS EN 60666:2010 礦物質絕緣油中制定添加劑的探測和測定

The methods described in this International Standard concern the detection and determination of specified additives in unused and used mineral insulating oils. The detection methods may be applied to assess whether or not a mineral insulating oil contains an additive as specified by the supplier. The determination methods are used for the quantitative determination of additives known to be present or previously detected by the appropriate detection method.

Detection and determination of specified additives in mineral insulating oils

DB21/T 1629-2008 柴油微乳化劑

Diesel microemulsifier

SH/T 0622-2007 乙丙共聚物粘度指數改進劑

本標準規定了用乙烯丙烯共聚物為原料，在 HVI150 或 HVI100 基礎油（見附錄 F）中經熱溶解、機械降解或熱氧化降解制得的粘度指數改進劑系列產品的術語和定義、分類、要求和試驗方法、檢驗規則、標志、包裝、運輸和貯存。 本標準所屬產品適用于調制多級內燃機油。

Ethylene propylene copolymer viscosity index improver

CGSB 3.0 NO 28.8-2007 CAN/CGSB-2007 石油和相關產品試驗方法.餾分燃料油的直觀評定

This test method describes a procedure for determining free (uncombined) alkali or acid in soap products.

Test methods for petroleum products and related products for visual assessment of turbidity of distillate fuel oils

CGSB 3.0 NO. 20.9-05-CAN/CGSB-2005 石油和相關產品試驗方法.加拿大通用標準委員會(CGSB)關于柴油十六烷指數的規定

Methods of Testing Petroleum and Associated Products CGSB Cetane Index of Diesel Fuels

Methods of Testing Petroleum and Associated Products CGSB Cetane Index of Diesel Fuels

SH/T 0766-2005 T1602噴氣燃料抗磨添加劑

本標準規定了以精制石油酸作為噴氣燃料抗磨添加劑的技術要求和試驗方法、檢驗規則及標志、包裝、運輸和貯存。 本標準所屬產品適用于噴氣燃料。

Antiwear additive for jet fuels T1602

CGSB 3.0 NO. 19.5-04-CAN/CGSB-2004 石油和相關產品試驗方法.車用汽油中鉛的測定(原子吸收法)

Methods of Testing Petroleum and Associated Products Determination of Lead in Automotive Gasoline (Atomic Absorption)

Methodes D'Essai Des Produits Petroliers Et Produits Connexes Dosage Du Plomb Dans L'Essence Pour Automobiles (Spectrophotometrie D'Absorption Atomique)