SY/T 6567-2016 天然氣輸送管道系統經濟運行規范

Specifications for economic operation of natural gas transmission pipeline systems

NB/T 10028-2016 煤層氣集輸管道運行管理規范

Coalbed methane gathering and transportation pipeline operation and management specifications

ISO 5667-4:2016 水質.采樣.第4部分:天然和人工湖泊水質采樣方法指南

Water quality - Sampling - Part 4: Guidance on sampling from lakes, natural and man-made

SY/T 7036-2016 石油天然氣站場管道及設備外防腐層技術規范

本規范適用于石油天然氣站場下述工況條件的管道及設備外防腐層設計、施工及檢驗： 1長期最高運行溫度為80℃的埋地非絕熱鋼質管道及設備。 2長期運行溫度為-35℃～400℃的埋地絕熱鋼質管道及設備。 3長期運行溫度為-35℃～400℃的地面鋼質管道及設備。

Specification of external coating for piping and equipments in petroleum and gas stations

NB/T 14002.4-2015 頁巖氣 儲層改造 第4部分：水平井泵送橋塞-射孔聯作技術推薦作法

Shale gas reservoir stimulation Part 4: Recommended practices for horizontal well pumping bridge plug-perforation combined technology

BS PD CEN/TS 16765:2015 液化石油氣設備和附件. CEN/TC 286標準的環境考慮

LPG equipment and accessories. Environmental considerations for CEN/TC 286 standards

UL 2586A-2015 UL汽油和汽油/乙醇混合燃料的名義乙醇濃度高達85%用軟管噴嘴閥安全標準(E0 - E85) (第一版)

UL Standard for Safety Hose Nozzle Valves for Gasoline and Gasoline/ Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 ?C E85) (First Edition; Reprint with revisions through and including June 29@ 2018)

SY/T 0027-2014 稠油注汽系統設計規范

本規范適用于下列蒸汽參數范圍內的陸上油田稠油注汽系統設計： 1 蒸汽壓力小于或等于21MPa的飽和蒸汽。 2 蒸汽壓力小于或等于17. 2MPa且溫度小于或等于380℃的過熱蒸汽。

Code for design of steam injection system for viscous crude

EN 14893:2014 液化石油氣(LPG)設備及配件.容量為150公升至1000公升的便攜式液化石油氣(LPG)焊接鋼壓力桶

This European Standard specifies the minimum requirements for the material, design, construction, workmanship, equipping, inspection and testing at manufacture of transportable, refillable welded steel pressure drums of volumes over 150 l up to and including 1000 l for Liquefied Petroleum Gases (LPG). Vertical and horizontal cylindrical receptacles are covered.

LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres

NF E86-608-1*NF EN 16321-1:2013 機動車輛在加油站補充燃油期間的汽油氣恢復.第1部分:汽油氣恢復系統的型式批準效率評定用試驗方法

Petrol vapour recovery during refuelling of motor vehicles at service stations - Part 1: test methods for the type approval efficiency assessment of petrol vapour recovery systems

EN 14125:2013 汽油加油站的地下設施用熱塑柔性金屬管道

This European Standard specifies requirements for underground pipework systems used to transfer liquid fuels and their vapours at petrol filling stations. Minimum performance requirements covering fitness for purpose, safety and environmental protection are given. This European Standard applies to pipework made from thermoplastics, which may include some degree of reinforcement, and to flexible metal pipework. It does not apply to fibre reinforced thermosets, commonly referred to as glass fibre reinforced plastic (GRP), nor to rigid metals. This document applies to: delivery pipes from tanks to dispensers, including positive pressure, vacuum suction and siphon modes; fill pipes from road tankers to tanks; vapour recovery and vent pipework; pipework for secondary containment; fittings. It does not apply to pipework for use with liquefied petroleum gas.

Thermoplastic and flexible metal pipework for underground installation at petrol filling stations

SY/T 4085-2012 灘海油田油氣集輸設計規范

本標準規定了灘海油田油氣集輸設施設計的術語和定義、基本規定、總圖及公用工程、油氣集輸及儲運、節能、健康、安全與環境等方面的技術要求本標準適用于灘海油田油氣集輸新建、擴建和改建工程。

Specifications for design of oil-gas gathering and transportation for oil field in beach-shallow sea

SY/T 6859-2012 油氣輸送管道風險評價導則

本標準規定了油氣輸送管道風險評價的一般程序、內容和原則。 本標準適用于在役油氣輸送管道，也可用于新建管道的風險預評價。

Guidelines for risk assessment of oil and gas pipelines

SY/T 6470-2011 油氣管道通用閥門操作維護檢修規程

本標準規定了輸油、輸氣管道用閥門的操作、維護及檢修的內容與要求，并列舉了常見故障的判斷及原因分析。 本標準適用于油氣管道上除設備附屬系統的小口徑閥門、調節閥、自力式調壓閥和安全閥之外的所有閥門。

Regulation for operation maintenance repair of general purpose valve in oil and gas pipeline

SY/T 5921-2011 立式圓筒形鋼制焊接油罐操作維護修理規程

本標準規定了立式圓筒形鋼制焊接油罐的操作、維護和修理的技術要求。 本標準適用于15×10m及以下立式圓筒形鋼制焊接油罐。其他儲存介質和容量的儲罐可參照執行。

Code of practice for operating, maintenance and repair of vertical cylindrical welded steel oil tanks

BS ISO 13739:2010 石油產品 將燃料轉運到船舶上的規程

Petroleum products. Procedures for transfer of bunkers to vessels CD-ROM

SY/T 6472-2010 油田生產主要能耗定額編制方法

本標準規定了油田生產主要能耗額定的分類與編制方法。 本標準適用于油田企業編制用能單位、生產系統和耗能設備的能耗額定。氣田企業可參照執行。

Method of stipulation of principal energy consumption norm for production of oil field

SY/T 6794-2010 可盤繞式增強塑料管線管的評定

本標準規定了油田集輸管線用可盤繞式增強塑料管線管的設計、制造、評定和應用規程，輸送介質包括多相流體、氣態烴、液態烴和水。 本標準涵蓋了材料選擇、產品評定和壓力等級確定等幾方面內容，主要包括質量控制試驗、靜水壓試驗、尺寸、材料特性、物理特性和最低性能要求等。 本標準主要適用于集輸管線系統中采用可盤繞式增強塑料管，其最大直徑為150mm，最大壓力為34.5MPa，最高使用溫度為93℃。超出此范圍的產品也可采用本標準中的原理進行設計。 本標準適用于管體、接頭或套筒，但不適用于其他的系統元件，如彎頭、T型接頭盒閥門等。 本標準中管線系統承受的載荷包括靜態或循環的壓力載荷和熱載荷，以及由安裝引起的載荷，但不包括其他形式的靜態或動態載荷。

Qualification of spoolable reinforced plastic line pipe

KS I ISO 6461-1:2010 水質.亞硫酸鹽還原厭氧細菌(梭狀芽孢桿菌)孢子的檢測和計數.第1部分:液體介質富集法

? ??? ?????? ??? ?? ???? ?? ??? ???(clostridia) ??

Water quality-Detection and enumeration of the spores of sulfite-reducing anaerobes(clostridia)-Part 1:Method by enrichment in a liquid medium

SY/T 0071-2010 油氣集輸管道組成件選用標準

本標準規定了油氣田油氣集輸工程管道組成件選用的一般要求。 本標準適用于陸上油氣田和灘海陸采油（氣）樹生產閥門后至輸油（氣）管道首站之間的油氣集輸工藝及其輔助系統管道的設計。

Standard of piping components selection for oil-gas gathering and transportation facilities