GB/T 14506.31-2019 硅酸鹽巖石化學分析方法 第31部分：二氧化硅等12個成分量測定 偏硼酸鋰熔融-電感耦合等離子體原子發射光譜法

Methods for chemical analysis of silicate rocks—Part 31: Determination of 12 components including silicon dioxide etc.—Lithium metaborate fusion-inductively coupled plasma atomic emission spectrometry

GB/T 5463.3-1986 非金屬礦產品名詞術語 石膏、硬石膏

本標準規定了石膏、硬石膏礦產品術語及其定義或涵義，適用于礦床開采、選礦加工、質量檢驗及其他有關的工作領域。

Technical terms of non-metallic mineral products--Gypsum and anhydrite

GB/T 5463.2-1985 非金屬礦產品名詞術語 滑石

本標準規定了滑石礦產品的主要名詞術語及其定義或涵義，適用于滑石標準化、滑石礦產地質勘探、生產加工、產品檢驗、貿易、科研和教學等領域。

Technical terms of non-metallic mineral products--Talc

GB/T 5463.1-1985 非金屬礦產品通用名詞術語

本標準規定了非金屬礦產品通用名詞術語及其定義或涵義。適用于非金屬礦產品標準化和非金屬礦產地質勘探、礦產品生產、加工、檢驗、貿易和科學研究、教學等工作領域。

Non-metallic mineral products--Commonly used terms

YS/T 337-2021 硫精礦

Sulfur concentrate

DB37/T 3209-2018 地下開采石膏礦山企業安全生產風險分級管控體系實施指南

Guidelines for the implementation of safety production risk classification management and control system for underground mining gypsum mine enterprises

DB37/T 3210-2018 地下開采石膏礦山企業生產安全事故隱患排查治理體系實施指南

Guidelines for the implementation of the hidden danger investigation and management system for production safety accidents in underground mining gypsum mine enterprises

DB63/T 1643-2018 含碳酸鹽石墨礦中固定碳含量的測定 酸溶分離差減重量法

Determination of fixed carbon content in carbonate-containing graphite ores Acid-soluble separation and subtraction weight method

DB37/T 1639.3-2018 山東省重點工業產品取水定額 第3部分：非金屬礦物制品行業重點工業產品

Water intake quotas for key industrial products in Shandong Province Part 3: Key industrial products in the non-metallic mineral product industry

AQ 2059-2016 磷石膏庫安全技術規程

本標準適用于中華人民共和國境內磷石膏庫。 本標準不適用于磷石膏臨時堆存和周轉堆場。

Phosphogypsum warehouse safety technical regulations

DB43/T 795-2013 石墨中鋁含量的測定 鉻天青-S分光光度法

Determination of Aluminum Content in Graphite Chromoazurin-S Spectrophotometric Method

KS E 3002-2011 礦石的鉛量測定方法

? ??? ?? ?? ? ?? ??? ??? ????. ??, ?? ???????? ? ?

Methods for determination of lead in ores

KS E 3005-2011 礦石的錳量測定方法

? ??? ???? ?? ?? ???? ?? ??? ??? ????.

Manganese ores－Determination of manganese content

KS E 3010-2011 分析礦石通用規則

? ??? ??? ???? ?? ? ? ??? ????? ??? ????? ??? ????

General rules for chemical analysis of manganese ores

ASTM D7572-11a 工藝過程修整發布后從礦山巖和土壤中提取氰化物的回收標準指南

This practice is intended as a means for obtaining an extract from mine rock and soil samples measure cyanide concentrations. Cyanide is analyzed in mine rock and soil extracts for measurement of cyanide concentration; however, improper sample collection and extraction can result in significant positive or negative bias, potentially resulting in unnecessary permit violations or undetected cyanide releases into the environment. This practice is designed to mobilize aqueous cyanides present in the solids, so that the resulting extract can be used to assess leachate that could potentially be produced from remediated mine rock or soil in the field. This practice is not intended to simulate actual site leaching conditions. This practice produces extracts that are amenable to the determination of minor (trace) constituents. When minor constituents are being determined, it is especially important that precautions be taken in sample preservation, storage and handling to avoid possible contamination of the extracts. This practice uses a comparative test method and is intended for use as a routine method for monitoring remediated mine rock and soils after process releases and remediation. It is assumed that all who use this practice will be trained analysts capable of performing it skillfully and safely. It is expected that work will be performed in a properly equipped laboratory applying appropriate quality control practices such as those described in Guide D3856.1.1 This guide is applicable for the collection, extraction and preservation of extracts from mine rock and soil samples for the analysis of cyanide in the extracts. Responsibilities of field sampling personnel and the laboratory are indicated. 1.2 The sampling, preservation and extraction procedures described in this practice are recommended for the analysis of total cyanide, available cyanide, weak acid dissociable cyanide, and free cyanide by Test Methods D2036, D4282, D4374, D6888, D6994, D7237, and D7284. The information supplied in this practice can also be applied to other analytical methods for cyanide, for example, US EPA Method 335.4. 1.3 The values stated in SI units are to be regarded as standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil After Remediation of Process Releases

SN/T 2731-2010 非金屬礦中石棉的定性方法 X射線衍射-顯微鏡觀察法

本標準規定了鑒別非金屬礦中石棉礦物和石棉的X射線衍射-偏光顯微鏡（或電子顯微鏡）觀察方法。 本標準適用于天然非金屬礦（粉狀滑石、天然水鎂石、菱鎂礦、白云石、膨潤土、海藻石、方解石、高嶺土、橄欖石、綠泥石等）中石棉（閃石石棉、蛇紋石石棉）的鑒定。

Identification of asbestos in nonmetal minerals.X-radial diffraction instrument-microscope observation method

YS/T 337-2009 硫精礦

本標準規定了硫精礦的要求、試驗方法、檢驗規則、標志、包裝、運輸、貯存、訂貨單(合同)內容。 本標準適用于重選和浮選所得、以供制造硫酸和提煉硫磺等使用的硫精礦產品。

Pyrite concentrate

ASTM D7572-09 工藝過程修整發布后從礦山巖和土壤中提取氰化物的回收標準指南

This practice is intended as a means for obtaining an extract from mine rock and soil samples to verify the effectiveness of cyanide release remediation. Cyanide is analyzed in mine rock and soil extracts after remediation of process spills, to demonstrate regulatory compliance; however, improper sample collection and extraction can result in significant positive or negative bias, potentially resulting in unnecessary permit violations or undetected cyanide releases into the environment. This practice is designed to mobilize aqueous cyanides present in the solids, so that the resulting extract can be used to assess leachate that could potentially be produced from remediated mine rock or soil in the field. This practice is not intended to simulate actual site leaching conditions. This practice produces extracts that are amenable to the determination of minor (trace) constituents. When minor constituents are being determined, it is especially important that precautions be taken in sample preservation, storage and handling to avoid possible contamination of the extracts. This practice uses a comparative test method and is intended for use as a routine method for monitoring remediated mine rock and soils after process releases and remediation. It is assumed that all who use this practice will be trained analysts capable of performing it skillfully and safely. It is expected that work will be performed in a properly equipped laboratory applying appropriate quality control practices such as those described in Guide D 3856.1.1 This guide is applicable for the collection, extraction and preservation of extracts from mine rock and soil samples after remediation of cyanide process releases for the analysis of cyanide in the extracts. Responsibilities of field sampling personnel and the laboratory are indicated. 1.2 The sampling, preservation and extraction procedures described in this practice are recommended for the analysis of total cyanide, available cyanide, weak acid dissociable cyanide, and free cyanide by Test Methods D 2036, D 4282, D 4374, D 6888, D 6994, D 7237, and D 7284. The information supplied in this practice can also be applied to other analytical methods for cyanide, for example, US EPA Method 335.4. 1.3 The values stated in SI units are to be regarded as standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil After Remediation of Process Releases

ASTM E463-09 用硅鉬酸鹽可見光分光法測定螢石中二氧化硅含量的標準試驗方法

This test method is intended as a referee method for compliance with compositional specifications for impurity content. It is assumed that all who use this procedure will be trained analysts capable of performing common laboratory practices skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Follow appropriate quality control practices such as those described in Guide E 882.1.1 This test method covers the determination of silica in fluorspar in concentrations from 0.5 % to 10 %. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry

KS E 3067-2008 礦石的錫量測定方法

? ??? ??? ?? ????? ??? ????.

Determination of tin in ores